Hi Andy,

Here is a patchset for msm8996 which enables more support to serial, i2c, spi,
sd card and pinctrl on msm8996. I was able to test i2c/sdcard with this patchset
on a APQ8096 based board on mainline.

Thanks,
srini

Srinivas Kandagatla (16):
  arm64: dts: msm8996: add msmgpio label
  arm64: dts: msm8996: add blsp2_uart1 pinctrl
  arm64: dts: msm8996: add blsp2_uart2 pinctrl nodes.
  arm64: dts: msm8996: add support blsp2_uart2
  arm64: dts: msm8996: add blsp1_i2c2 pinctrl nodes.
  arm64: dts: msm8996: add support to blsp1_i2c2 device
  arm64: dts: msm8996: add blsp2_i2c1 pinctrl
  arm64: dts: msm8996: add support to blsp2_i2c1
  arm64: dts: msm8996: add support to blsp2_i2c0 pinctrl
  arm64: dts: msm8996: add support to blsp2_i2c0
  arm64: dts: msm8996: add support to blsp1_spi0 pinctrl
  arm64: dts: msm8996: add support to blsp1_spi0
  arm64: dts: msm8996: add support to blsp2_spi5 pinctrl
  arm64: dts: msm8996: add support to blsp2_spi5
  arm64: dts: msm8996: add sdc2 pinctrl
  arm64: dts: msm8996: add sdc2 support

 arch/arm64/boot/dts/qcom/msm8996-pins.dtsi | 303 +++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/msm8996.dtsi      | 103 +++++++++-
 2 files changed, 405 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8996-pins.dtsi

-- 
2.7.4