Re: [PATCH v2 01/15] dt-bindings: sunxi: Add CCU binding documentation
From: Chen-Yu Tsai <hidden>
Date: 2016-06-08 01:37:57
Also in:
linux-arm-kernel, linux-clk, lkml
On Wed, Jun 8, 2016 at 4:41 AM, Maxime Ripard [off-list ref] wrote:
quoted hunk ↗ jump to hunk
Introduce a new binding with its documentation for the brand new clock sub-framework. Signed-off-by: Maxime Ripard <redacted> --- Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/sunxi-ccu.txtdiff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt new file mode 100644 index 000000000000..2c66046a1342 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt@@ -0,0 +1,17 @@ +Allwinner Clock Control Unit Binding +------------------------------------ + +Required properties : +- compatible: must contain one of the following compatible: + - "allwinner,sun8i-h3-ccu" + +- reg: Must contain the registers base address and length +- clocks: phandle to the oscillators feeding the SPI controller. Two are
SPI? copy paste error?
+ needed: + - "hosc": the high frequency oscillator (usually at 24MHz) + - "losc": the low frequency oscillator (usually at 32kHz) +- clock-names: Must contain the clock names described just above +- #clock-cells : must contain 1 +- #reset-cells : must contain 1 + +Example:
No example? Maybe just remove this section then. ChenYu
-- 2.8.3