[PATCH v2 01/15] dt-bindings: sunxi: Add CCU binding documentation
From: Maxime Ripard <hidden>
Date: 2016-06-07 20:42:14
Also in:
linux-arm-kernel, linux-clk, lkml
Subsystem:
common clk framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Introduce a new binding with its documentation for the brand new clock sub-framework. Signed-off-by: Maxime Ripard <redacted> --- Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/sunxi-ccu.txt
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
new file mode 100644
index 000000000000..2c66046a1342
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt@@ -0,0 +1,17 @@ +Allwinner Clock Control Unit Binding +------------------------------------ + +Required properties : +- compatible: must contain one of the following compatible: + - "allwinner,sun8i-h3-ccu" + +- reg: Must contain the registers base address and length +- clocks: phandle to the oscillators feeding the SPI controller. Two are + needed: + - "hosc": the high frequency oscillator (usually at 24MHz) + - "losc": the low frequency oscillator (usually at 32kHz) +- clock-names: Must contain the clock names described just above +- #clock-cells : must contain 1 +- #reset-cells : must contain 1 + +Example:
--
2.8.3