Re: [PATCH 5/7] mtd: nand: Add Hynix H27UBG8T2BTR-BC to nand_ids table

On Mon, 6 Jun 2016 22:31:38 +0200
Boris Brezillon [off-list ref] wrote:

On Mon, 6 Jun 2016 22:59:03 +0300
Aleksei Mamlin [off-list ref] wrote:

quoted

On Mon, 6 Jun 2016 20:55:49 +0200
Boris Brezillon [off-list ref] wrote:

quoted

On Mon,  6 Jun 2016 13:24:22 +0300
Aleksei Mamlin [off-list ref] wrote:
  

quoted

Add the full description of the Hynix H27UBG8T2BTR-BC NAND chip in the
nand_ids table so that we can later use the NAND ECC infos and ONFI timings
mode in controller drivers.  

Still hoping to get this series [1] merged in 4.8, but if that's
not the case, I'll apply your patch.

BTW, that would be great if you could test it on your platforms.
  

It seems that Hynix-specific initialization code can't handle H27UBG8T2BTR-BC
chip:

[    0.886153] nand: Could not find valid ONFI parameter page; aborting
[    0.892665] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xd7
[    0.899025] nand: Hynix 1c03000.nand
[    0.902596] nand: bus width 8 instead 16 bit
[    0.906858] nand: No NAND device found
[    0.910620] sunxi_nand 1c03000.nand: failed to init nand chips
[    0.916528] sunxi_nand: probe of 1c03000.nand failed with error -22

Can you try this patch? It should fix the problem [1].

[1]http://code.bulix.org/6hjww1-100494

Yes, it fixes problem. What about ONFI parameter page? Should it be ignored?
[    0.886068] nand: Could not find valid ONFI parameter page; aborting
[    0.892571] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xd7
[    0.898917] nand: Hynix NAND 4GiB 3,3V 8-bit
[    0.903198] nand: 4096 MiB, MLC, erase size: 2048 KiB, page size: 8192, OOB size: 640
[    0.911908] Bad block table found at page 524032, version 0x01
[    0.918534] Bad block table found at page 523776, version 0x01
[    0.972112] 5 ofpart partitions found on MTD device 1c03000.nand
[    0.978116] Creating 5 MTD partitions on "1c03000.nand":
[    0.983477] 0x000000000000-0x000000200000 : "boot0"
[    0.988803] 0x000000200000-0x000000400000 : "boot0-rescue"
[    0.994692] 0x000000400000-0x000000600000 : "uboot"
[    0.999944] 0x000000600000-0x000000800000 : "uboot-rescue"
[    1.005763] 0x000000800000-0x000100000000 : "main"

-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

-- 
Thanks and regards,
Aleksei Mamlin