[PATCH 02/14] regulator: pwm: Drop unneeded pwm_enable() call
flat view
STALE3776d
From: Boris Brezillon <hidden>
Date: 2016-06-03 08:29:11
Also in:
linux-arm-kernel, linux-pwm, linux-rockchip, lkml
Subsystem:
the rest, voltage and current regulator framework · Maintainers:
Linus Torvalds, Liam Girdwood, Mark Brown
Revision v1 of 3 in this series.
Revisions (3)
- v1 current
- v2 [diff vs current]
- v3 [diff vs current]
Now that the PWM regulator driver implements the ->enable/disable() hooks we can remove the pwm_enable() call from pwm_regulator_set_voltage(). Signed-off-by: Boris Brezillon <boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> --- drivers/regulator/pwm-regulator.c | 5 ----- 1 file changed, 5 deletions(-)
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index fafa348..ab3cc02 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c@@ -159,11 +159,6 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev, return ret; } - ret = pwm_enable(drvdata->pwm); - if (ret) { - dev_err(&rdev->dev, "Failed to enable PWM: %d\n", ret); - return ret; - } drvdata->volt_uV = min_uV; /* Delay required by PWM regulator to settle to the new voltage */
--
2.7.4