On 03/01/2016 01:23 AM, Tony Lindgren wrote:

* Franklin S Cooper Jr [off-list ref] [160225 14:37]:

quoted

From: Vignesh R <vigneshr@ti.com>

tbclk is used by ehrpwm to generate PWM waveform on DRA7 SoC. Add Linux
clock to control ehrpwm tbclk.
The TRM says, tbclk is derived from SYSCLKOUT. SYSCLKOUT is nothing but
ehrpwm functional clock derived from the gateable interface and
functional clock of PWMSS(l4_root_clk_div).
Refer AM57x TRM SPRUHZ6[1], October 2014, Table 29-4 and Section 29.2.2.1,
Table 29-19 and the NOTE at the end of the table.

[1] www.ti.com/lit/ug/spruhz6/spruhz6.pdf

Applying this into omap-for-v4.6/dt thanks.

Note for Tero, let's plan on getting rid of the duplicate
reg entries by using the standard clock output offset within
the clock register. I think we should easily be able to add
a binding for this and then deprecate the overlapping reg
entries.

Yeah, we have been discussing this offline a bit, but haven't had time 
to look at this. I believe the hwmod clock conversion is of higher 
priority still.

-Tero

Regards,

Tony

quoted

--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi

@@ -2146,4 +2146,28 @@
  		ti,bit-shift = <0>;
  		reg = <0x558>;
  	};
+
+       ehrpwm0_tbclk: ehrpwm0_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_root_clk_div>;
+		ti,bit-shift = <20>;
+		reg = <0x0558>;
+	};
+
+	ehrpwm1_tbclk: ehrpwm1_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_root_clk_div>;
+		ti,bit-shift = <21>;
+		reg = <0x0558>;
+	};
+
+	ehrpwm2_tbclk: ehrpwm2_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_root_clk_div>;
+		ti,bit-shift = <22>;
+		reg = <0x0558>;
+	};
  };
--

2.7.0