[PATCH v2 3/7] QE: Add uqe_serial document to bindings
From: Zhao Qiang <qiang.zhao@nxp.com>
Date: 2016-02-18 01:29:43
Also in:
linuxppc-dev, lkml
Subsystem:
linux for powerpc (32-bit and 64-bit), linux for powerpc embedded ppc85xx, open firmware and flattened device tree bindings, the rest · Maintainers:
Madhavan Srinivasan, Scott Wood, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add uqe_serial document to Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> --- Changes for v2 - modify tx/rx-clock-name specification .../bindings/powerpc/fsl/cpm_qe/uqe_serial.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt
new file mode 100644
index 0000000..436c71c
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt@@ -0,0 +1,19 @@ +* Serial + +Currently defined compatibles: +- ucc_uart + +Properties for ucc_uart: +port-number : port number of UCC-UART +tx/rx-clock-name : should be "brg1"-"brg16" for internal clock source, + should be "clk1"-"clk28" for external clock source. + +Example: + + ucc_serial: ucc@2200 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <1>; + rx-clock-name = "brg2"; + tx-clock-name = "brg2"; + };
--
2.1.0.27.g96db324
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev