[PATCH RFC 0/3] leds: add SN3218 LED driver

This patch series implements support for the Si-En SN3218
18 Channel LED Driver through I2C. This implemention only write
data over I2C und get the platform data via DT.

The driver has been tested on a Raspberry Pi B.

Stefan Wahren (3):
  of: Add vendor prefix for Si-En Technology
  DT: add binding for SN3218 LED driver
  leds: add SN3218 LED driver

 .../devicetree/bindings/leds/leds-sn3218.txt       |   41 ++++
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 drivers/leds/Kconfig                               |    8 +
 drivers/leds/Makefile                              |    1 +
 drivers/leds/leds-sn3218.c                         |  254 ++++++++++++++++++++
 5 files changed, 305 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-sn3218.txt
 create mode 100644 drivers/leds/leds-sn3218.c

-- 
1.7.9.5