[PATCH v2 1/7] dt-binding: Add ngpios property to GPIO controller node
From: Pramod Kumar <hidden>
Date: 2015-11-19 03:52:36
Also in:
linux-arm-kernel, linux-gpio, lkml
Subsystem:
open firmware and flattened device tree bindings, pin control subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Linus Torvalds
Add ngpios property to the gpio controller's DT node so that controller driver extracts total number of in-use gpio lines from DT and removes dependency on driver. Signed-off-by: Pramod Kumar <redacted> Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> --- Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
index 16589fb6..8b1e5d1 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt@@ -10,6 +10,9 @@ Required properties: Define the base and range of the I/O address space that contains the Cygnus GPIO/PINCONF controller registers +- ngpios: + Total number of in-use slots in GPIO controller + - #gpio-cells: Must be two. The first cell is the GPIO pin number (within the controller's pin space) and the second cell is used for the following:
@@ -57,6 +60,7 @@ Example: compatible = "brcm,cygnus-ccm-gpio"; reg = <0x1800a000 0x50>, <0x0301d164 0x20>; + ngpios = <24>; #gpio-cells = <2>; gpio-controller; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -78,6 +82,7 @@ Example: gpio_asiu: gpio@180a5000 { compatible = "brcm,cygnus-asiu-gpio"; reg = <0x180a5000 0x668>; + ngpios = <146>; #gpio-cells = <2>; gpio-controller; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
--
1.9.1