Re: [PATCH v2 0/6] Introduce Allwinner A33 support

On Sat, May 30, 2015 at 10:55 PM, Hans de Goede [off-list ref] wrote:

Hi Maxime,

Here is a cleaned up series of Vishnu Patekar's A33 support. This should
address all concerns raised during the posting of v1.

I've tested that all peripherals declared in the shared sun8i-a23-a33.dtsi
work on the A33 too, with the exception of the dma-controller. For the
dma-controller I've compared the A23 vs A33 manual and the entire dma-
controller description including the register description is bit for bit
identical.

This has been tested on a 7" Ippo Q8H v1.2 A23 tablet, a 7" Ippo Q8H v1.2
A33 tablet and a 10" GA10H A33 tablet. The dts for the 10" tablet still
needs some work wrt the lradc button voltages so that is not included
in this set.

Whole series is

Tested-by: Chen-Yu Tsai <redacted>

on my Sinlinx SinA33 dev board. I'll send patches for it later.