[PATCH v2 0/6] Introduce Allwinner A33 support
From: Chen-Yu Tsai <hidden>
Date: 2015-06-02 07:43:25
Also in:
linux-devicetree
Possibly related (same subject, not in this thread)
- 2016-06-13 · Re: [PATCH v2 0/6] Introduce Allwinner A33 support · <hidden>
- 2015-05-30 · Re: [PATCH v2 0/6] Introduce Allwinner A33 support · jonsmirl-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org <hidden>
- 2015-05-30 · [PATCH v2 0/6] Introduce Allwinner A33 support · Hans de Goede <hidden>
On Sat, May 30, 2015 at 10:55 PM, Hans de Goede [off-list ref] wrote:
Hi Maxime, Here is a cleaned up series of Vishnu Patekar's A33 support. This should address all concerns raised during the posting of v1. I've tested that all peripherals declared in the shared sun8i-a23-a33.dtsi work on the A33 too, with the exception of the dma-controller. For the dma-controller I've compared the A23 vs A33 manual and the entire dma- controller description including the register description is bit for bit identical. This has been tested on a 7" Ippo Q8H v1.2 A23 tablet, a 7" Ippo Q8H v1.2 A33 tablet and a 10" GA10H A33 tablet. The dts for the 10" tablet still needs some work wrt the lradc button voltages so that is not included in this set.
Whole series is Tested-by: Chen-Yu Tsai <redacted> on my Sinlinx SinA33 dev board. I'll send patches for it later.