Thread (42 messages) 42 messages, 6 authors, 2015-05-11

Re: [STLinux Kernel] [PATCH 02/12] clocksource: sti: Provide support for the ST LPC Clocksource IP

From: Lee Jones <hidden>
Date: 2015-05-07 19:13:31
Also in: linux-arm-kernel, linux-rtc, linux-watchdog, lkml

quoted
This IP is shared with Watchdog and RTC functionality.  Only one of
these IPs can be used at the same time.  We use the device-driver
model combined with a DT 'mode' property to enforce this.
Which means my previous assertion in V1 that the IP didn't exist on stih415/6
SoC is most likely wrong, as the watchdog driver has bindings already for those
platforms.

I did try this before and couldn't get it working (driver failed on clk_get_rate)
on stih416-b2020.

Did you try and see if you can get this also working for stih415/6 SoCs? It would
mean we can move away from arm_global_timer for all upstreamed STI platforms.
This patch-set only supports STiH4{07,10}, which is the only platform
it's been tested on until this point.  I can investigate porting it to
Orly/Orly2 as a subsequent piece of work if it's going to be useful
for ST.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help