Re: [PATCH v2 2/5] irqchip: Add DT binding doc for dumb demuxer chips

---
 .../bindings/interrupt-controller/dumb-demux.txt   | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/dumb-demux.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/dumb-demux.txt b/Documentation/devicetree/bindings/interrupt-controller/dumb-demux.txt
new file mode 100644
index 0000000..1c777ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/dumb-demux.txt

@@ -0,0 +1,34 @@
+* Generic Dumb Interrupt Demultiplexer
+
+This Dumb demultiplixer simply forward all incoming interrupts to its
+enabled/unmasked children.
+
+Required properties:
+- compatible: Should be "irqchip-dumb-demux".
+- interrupt-controller: Identifies the node as an interrupt controller.
+- interrupts-extended or interrupt-parent and interrupts: Reference the source
+  interrupt connected to this dumb demuxer.
+- #interrupt-cells: The number of cells to define the interrupts (should be 1).
+  The only cell is the IRQ number.
+- irqs: u32 bitfield specifying the interrupts provided by the demuxer.
+
+Examples:
+	/*
+	 * Dumb demuxer controller
+	 */
+	dumb_irq1_demux: dumb-irq-demux@1 {
+		compatible = "irqchip-dumb-demux";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupts-extended = <&aic 1 IRQ_TYPE_LEVEL_HIGH 7>;
+		irqs = <0x3f>;
+	};
+
+	/*
+	 * Device connected on this dumb demuxer
+	 */
+	dma: dma-controller@ffffec00 {
+		compatible = "atmel,at91sam9g45-dma";
+		reg = <0xffffec00 0x200>;
+		interrupts-extended = <&dumb_irq1_demux 0>;
+	};