[PATCH 0/5] Add gpio support to Broadcom Cygnus SoC

This patchset contains the initial GPIO support for the Broadcom Cygnus SoC.
Cygnus has 3 GPIO controllers: 1) the ASIU GPIO; 2) the chipCommonG GPIO;
and 3) the ALWAYS-ON GPIO. All 3 types of GPIO controllers are supported by
the same Cygnus GPIO driver

Ray Jui (5):
  gpio: Cygnus: define Broadcom Cygnus GPIO binding
  gpio: Cygnus: add GPIO driver
  ARM: mach-bcm: Enable GPIO support for Cygnus
  ARM: dts: enable GPIO for Broadcom Cygnus
  MAINTAINERS: Entry for Cygnus GPIO driver

 .../devicetree/bindings/gpio/brcm,cygnus-gpio.txt  |   85 +++
 MAINTAINERS                                        |    7 +
 arch/arm/boot/dts/bcm-cygnus.dtsi                  |   30 +
 arch/arm/mach-bcm/Kconfig                          |    1 +
 drivers/gpio/Kconfig                               |   11 +
 drivers/gpio/Makefile                              |    1 +
 drivers/gpio/gpio-bcm-cygnus.c                     |  719 ++++++++++++++++++++
 7 files changed, 854 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/brcm,cygnus-gpio.txt
 create mode 100644 drivers/gpio/gpio-bcm-cygnus.c

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html