[PATCH V8 14/14] ARM: dts: peach-pit: represent the connection between bridge and panel using videoport and endpoints
From: Ajay Kumar <hidden>
Date: 2014-11-15 09:55:09
Also in:
dri-devel, linux-arm-kernel, linux-samsung-soc
Subsystem:
the rest · Maintainer:
Linus Torvalds
Define videoports and use endpoints to describe the connection between the encoder, bridge and the panel, instead of using phandles. Signed-off-by: Ajay Kumar <redacted> --- arch/arm/boot/dts/exynos5420-peach-pit.dts | 31 ++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 82cdb74..9d06aef 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts@@ -107,6 +107,12 @@ compatible = "auo,b116xw03"; power-supply = <&tps65090_fet6>; backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; }; };
@@ -126,7 +132,14 @@ samsung,link-rate = <0x06>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx2 6 0>; - bridge = <&ps8625>; + + ports { + port@0 { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; }; &fimd {
@@ -504,8 +517,22 @@ sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>; lane-count = <2>; - panel = <&panel>; use-external-pwm; + + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + }; };
--
1.7.9.5