Thread (14 messages) flat view 14 messages, 3 authors, 2014-09-12
STALE4395d

Revision v2 of 5 in this series.

Revisions (5)
  1. v1 [diff vs current]
  2. v1 [diff vs current]
  3. resend [diff vs current]
  4. v2 current
  5. v3 [diff vs current]

[PATCH v2 1/2] ARM: dts: dra7: Add CPSW and MDIO module nodes for dra7

From: Mugunthan V N <hidden>
Date: 2014-09-10 13:37:41
Also in: linux-omap, lkml
Subsystem: the rest · Maintainer: Linus Torvalds

Add CPSW and MDIO related device tree data for DRA7XX and made as status
disabled. Phy-id, pinmux for active and sleep state needs to be added in
board dts files and enable the CPSW device.

Signed-off-by: Mugunthan V N <redacted>
---
 arch/arm/boot/dts/dra7.dtsi | 59 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index d678152..8d79321 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -34,6 +34,8 @@
 		serial3 = &uart4;
 		serial4 = &uart5;
 		serial5 = &uart6;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
 	};
 
 	timer {
@@ -1262,6 +1264,63 @@
 			ti,irqs-skip = <10 133 139 140>;
 			ti,irqs-safe-map = <0>;
 		};
+
+		mac: ethernet@4a100000 {
+			compatible = "ti,cpsw";
+			ti,hwmods = "gmac";
+			cpdma_channels = <8>;
+			ale_entries = <1024>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			active_slave = <0>;
+			cpts_clock_mult = <0x80000000>;
+			cpts_clock_shift = <29>;
+			reg = <0x48484000 0x1000
+			       0x48485200 0x2E00>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * rx_thresh_pend
+			 * rx_pend
+			 * tx_pend
+			 * misc_pend
+			 */
+			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+			ranges;
+			status = "disabled";
+
+			davinci_mdio: mdio@48485000 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				reg = <0x48485000 0x100>;
+			};
+
+			cpsw_emac0: slave@48480200 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			cpsw_emac1: slave@48480300 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			phy_sel: cpsw-phy-sel@4a002554 {
+				compatible = "ti,dra7xx-cpsw-phy-sel";
+				reg= <0x4a002554 0x4>;
+				reg-names = "gmii-sel";
+			};
+		};
+
 	};
 };
 
-- 
2.1.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help