Re: [PATCH v3 5/6] ARM: dts: qcom: Add PM8941 and PM8841 pinctrl nodes
From: Pramod Gurav <hidden>
Date: 2014-08-14 07:29:39
Also in:
linux-arm-msm, lkml
Hi Ivan, This patch fail to apply on linux-next Tree. Probably because this is based on Stanimir's older patch series "Support for Qualcomm QPNP PMIC's". He has posted v4 of them on which it fails to apply. Am I correct? Thanks Pramod On Monday 11 August 2014 09:10 PM, Ivan T. Ivanov wrote:
quoted hunk ↗ jump to hunk
From: "Ivan T. Ivanov" <redacted> Add nodes for PM8941 and PM8841 GPIO and MPP PMIC subfunctions. Signed-off-by: Ivan T. Ivanov <redacted> --- arch/arm/boot/dts/qcom-msm8974.dtsi | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index c7ae7ba..3967797 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi@@ -267,6 +267,31 @@ reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; + + pm8941_gpios: gpios@c000 { + compatible = "qcom,pm8941-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 0>, <0 0xc1 0 0>, <0 0xc2 0 0>, <0 0xc3 0 0>, + <0 0xc4 0 0>, <0 0xc5 0 0>, <0 0xc6 0 0>, <0 0xc7 0 0>, + <0 0xc8 0 0>, <0 0xc9 0 0>, <0 0xca 0 0>, <0 0xcb 0 0>, + <0 0xcc 0 0>, <0 0xcd 0 0>, <0 0xce 0 0>, <0 0xcf 0 0>, + <0 0xd0 0 0>, <0 0xd1 0 0>, <0 0xd2 0 0>, <0 0xd3 0 0>, + <0 0xd4 0 0>, <0 0xd5 0 0>, <0 0xd6 0 0>, <0 0xd7 0 0>, + <0 0xd8 0 0>, <0 0xd9 0 0>, <0 0xda 0 0>, <0 0xdb 0 0>, + <0 0xdc 0 0>, <0 0xdd 0 0>, <0 0xde 0 0>, <0 0xdf 0 0>, + <0 0xe0 0 0>, <0 0xe1 0 0>, <0 0xe2 0 0>, <0 0xe3 0 0>; + }; + + pm8941_mpps: mpps@a000 { + compatible = "qcom,pm8941-mpp"; + reg = <0xa000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xa0 0 0>, <0 0xa1 0 0>, <0 0xa2 0 0>, <0 0xa3 0 0>, + <0 0xa4 0 0>, <0 0xa5 0 0>, <0 0xa6 0 0>, <0 0xa7 0 0>; + }; }; usid1: pm8941@1 {@@ -281,6 +306,14 @@ reg = <0x4 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm8841_mpps: mpps@a000 { + compatible = "qcom,pm8841-mpp"; + reg = <0xa000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <4 0xa0 0 0>, <4 0xa1 0 0>, <4 0xa2 0 0>, <4 0xa3 0 0>; + }; }; usid5: pm8841@5 {