On 01/08/2014 at 00:10:05 +0800, Jean-Christophe PLAGNIOL-VILLARD wrote :

quoted

quoted

quoted

While this solves the particular issue Jiří is seeing, this will not
solve the case where PA14 (CS0) is not used by the spi driver at all. It
will remained muxed as CS0 and toggle when the spi master needs to
access CS0 until another driver muxes it to something else. I still
believe we should explicitly ask pinctrl to mux them as gpios.

This is not the job of the kernel but to the bootloader
no the pinctrl binding is not here and will never be here the configure a pin as a GPIO or

This is exactly what AT91_PERIPH_GPIO does though. Anyway, not request
the pinmuxing in the driver is not a good idea, then nothing prevents
another driver to request them to do something completely different.

to a specific state. This the job of the driver or the bootloader

I agree that it must not allow to set the state, we are talking about
muxing.


-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html