Thread (30 messages) 30 messages, 7 authors, 2014-06-23

RE: [PATCH v2 3/8] PCI: designware: update pcie core driver to work with dw hw version 3.65

From: Mohit KUMAR DCG <hidden>
Date: 2014-06-18 07:15:31
Also in: linux-arm-kernel, linux-pci, lkml

Hello Murali,
-----Original Message-----
From: Murali Karicheri [mailto:m-karicheri2@ti.com]
Sent: Wednesday, June 11, 2014 12:21 AM
To: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
linux-pci@vger.kernel.org; devicetree@vger.kernel.org; linux-
doc@vger.kernel.org
Cc: Murali Karicheri; Santosh Shilimkar; Russell King; Grant Likely; Rob Herring;
Mohit KUMAR DCG; Jingoo Han; Bjorn Helgaas; Pratyush ANAND; Richard
Zhu; Kishon Vijay Abraham I; Marek Vasut; Arnd Bergmann; Pawel Moll;
Mark Rutland; Ian Campbell; Kumar Gala; Randy Dunlap
Subject: [PATCH v2 3/8] PCI: designware: update pcie core driver to work
with dw hw version 3.65

v3.65 version of the dw hw has MSI controller implemented in the application
space. Add a version variable in the port struct to identify v3.65 hardware for
different code treatment. This variable will have DW_V3_65 bit set when
running on this hw version. The host init code is expected to set this version
based on compatibility string dw,snps-pcie-v3.65.

Some of the MSI specific functions from current DW driver are re-used on
v3.65 hw. However on v3.65, MSI controller registers are in the application
register space and PCIE_MSI_INTR0_ENABLE is not applicable.
Modify assign_irq() to check for version and not execute the code for
PCIE_MSI_INTR0_ENABLE configuration on v3.65 hw. Additionally MSI IRQ
register in application space is written by EP to raise an MSI IRQ. So add a
get_msi_data() function in pcie_host_ops to retrieve the register address in
dw_msi_setup_irq(). v3.65 dw core driver implements this function.

Also make some of the functions available in dw core driver global and make
their prototypes available in the header file for re-use on v3.65.
- Pls apply MSI specific changes on the top of Lucas patches:
[PATCH 0/4] proper multi MSI handling for designware host

Thanks
Mohit
quoted hunk ↗ jump to hunk
Signed-off-by: Murali Karicheri <redacted>

CC: Santosh Shilimkar <redacted>
CC: Russell King <redacted>
CC: Grant Likely <redacted>
CC: Rob Herring <robh+dt@kernel.org>
CC: Mohit Kumar <redacted>
CC: Jingoo Han <redacted>
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Pratyush Anand <redacted>
CC: Richard Zhu <redacted>
CC: Kishon Vijay Abraham I <redacted>
CC: Marek Vasut <marex@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Pawel Moll <redacted>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <redacted>
CC: Kumar Gala <redacted>
CC: Randy Dunlap <redacted>
CC: Grant Likely <redacted>

---
 drivers/pci/host/pcie-designware.c |   27 +++++++++++++++++----------
 drivers/pci/host/pcie-designware.h |   16 ++++++++++++++++
 2 files changed, 33 insertions(+), 10 deletions(-)
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-
designware.c
index e4bd19a..f985811 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -277,11 +277,15 @@ static int assign_irq(int no_irqs, struct msi_desc
*desc, int *pos)
 		}
 		set_bit(pos0 + i, pp->msi_irq_in_use);
 		/*Enable corresponding interrupt in MSI interrupt controller
*/
-		res = ((pos0 + i) / 32) * 12;
-		bit = (pos0 + i) % 32;
-		dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res,
4, &val);
-		val |= 1 << bit;
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res,
4, val);
+		if (!(pp->version & DW_V3_65)) {
+			res = ((pos0 + i) / 32) * 12;
+			bit = (pos0 + i) % 32;
+			dw_pcie_rd_own_conf(pp,
PCIE_MSI_INTR0_ENABLE + res,
+					    4, &val);
+			val |= 1 << bit;
+			dw_pcie_wr_own_conf(pp,
PCIE_MSI_INTR0_ENABLE + res,
+					    4, val);
+		}
 	}

 	*pos = pos0;
@@ -349,7 +353,10 @@ static int dw_msi_setup_irq(struct msi_chip *chip,
struct pci_dev *pdev,
 	 */
 	desc->msi_attrib.multiple = msgvec;

-	msg.address_lo = virt_to_phys((void *)pp->msi_data);
+	if (pp->ops->get_msi_data)
+		msg.address_lo = pp->ops->get_msi_data(pp);
+	else
+		msg.address_lo = virt_to_phys((void *)pp->msi_data);
 	msg.address_hi = 0x0;
 	msg.data = pos;
 	write_msi_msg(irq, &msg);
@@ -768,7 +775,7 @@ static struct pci_ops dw_pcie_ops = {
 	.write = dw_pcie_wr_conf,
 };

-static int dw_pcie_setup(int nr, struct pci_sys_data *sys)
+int dw_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct pcie_port *pp;
@@ -791,7 +798,7 @@ static int dw_pcie_setup(int nr, struct pci_sys_data
*sys)
 	return 1;
 }

-static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	struct pci_bus *bus;
 	struct pcie_port *pp = sys_to_pcie(sys); @@ -808,7 +815,7 @@ static
struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 	return bus;
 }

-static int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
 	int irq;
@@ -820,7 +827,7 @@ static int dw_pcie_map_irq(const struct pci_dev
*dev, u8 slot, u8 pin)
 	return irq;
 }

-static void dw_pcie_add_bus(struct pci_bus *bus)
+void dw_pcie_add_bus(struct pci_bus *bus)
 {
 	if (IS_ENABLED(CONFIG_PCI_MSI)) {
 		struct pcie_port *pp = sys_to_pcie(bus->sysdata); diff --git
a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h
index 2d6dd66..3a6a6eb 100644
--- a/drivers/pci/host/pcie-designware.h
+++ b/drivers/pci/host/pcie-designware.h
@@ -39,6 +39,12 @@ struct pcie_port {
 	void __iomem		*va_cfg0_base;
 	u64			cfg1_base;
 	void __iomem		*va_cfg1_base;
+	/*
+	 * v3.65 DW hw implements application register space for
+	 * MSI and has no ATU view port
+	 */
+#define DW_V3_65		BIT(0)
+	u32			version;
 	u64			io_base;
 	u64			mem_base;
 	spinlock_t		conf_lock;
@@ -68,6 +74,7 @@ struct pcie_host_ops {
 			unsigned int devfn, int where, int size, u32 val);
 	int (*link_up)(struct pcie_port *pp);
 	void (*host_init)(struct pcie_port *pp);
+	u32 (*get_msi_data)(struct pcie_port *pp);
 };

 int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val);
@@ -77,5 +84,14 @@ void dw_pcie_msi_init(struct pcie_port *pp);  int
dw_pcie_link_up(struct pcie_port *pp);  void dw_pcie_setup_rc(struct
pcie_port *pp);  int dw_pcie_host_init(struct pcie_port *pp);
+int dw_pcie_setup(int nr, struct pci_sys_data *sys); struct pci_bus
+*dw_pcie_scan_bus(int nr, struct pci_sys_data *sys); void
+dw_pcie_add_bus(struct pci_bus *bus); int
dw_pcie_parse_resource(struct
+pcie_port *pp);

+/* internal to DW common core driver */ int
+dw_pcie_common_host_init(struct pcie_port *pp, struct hw_pci *hw); int
+dw_pcie_msi_host_init(struct pcie_port *pp, struct device_node *np,
+			const struct irq_domain_ops *irq_ops); int
dw_pcie_map_irq(const
+struct pci_dev *dev, u8 slot, u8 pin);
 #endif /* _PCIE_DESIGNWARE_H */
--
1.7.9.5
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help