Thread (34 messages) 34 messages, 6 authors, 2014-05-14

Re: [PATCHv4 7/7] ARM: dts: Add device tree sources for Exynos3250

From: Chanwoo Choi <cw00.choi@samsung.com>
Date: 2014-05-09 06:50:06
Also in: linux-arm-kernel, linux-samsung-soc, lkml

Hi Tomasz,

On 04/26/2014 08:38 PM, Tomasz Figa wrote:
On 26.04.2014 02:51, Tomasz Figa wrote:
quoted
Hi Chanwoo,

On 25.04.2014 03:16, Chanwoo Choi wrote:
quoted
From: Tomasz Figa <redacted>

This patch add new exynos3250.dtsi to support Exynos3250 SoC based on
Cortex-A7
dual core and includes following dt nodes:

- GIC interrupt controller
- Pinctrl to control GPIOs
- Clock controller
- CPU information (Cortex-A7 dual core)
- UART to support serial port
- MCT (Multi Core Timer)
- ADC (Analog Digital Converter)
- I2C/SPI bus
- Power domain
- PMU (Performance Monitoring Unit)
- MSHC (Mobile Storage Host Controller)
- PWM (Pluse Width Modulation)
- AMBA bus

Signed-off-by: Tomasz Figa <redacted>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Hyunhee Kim <redacted>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <redacted>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <redacted>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <redacted>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <redacted>
Cc: Kumar Gala <redacted>
Cc: Russell King <redacted>
Cc: devicetree@vger.kernel.org
---
  arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 477 +++++++++++++++
  arch/arm/boot/dts/exynos3250.dtsi         | 405 +++++++++++++
  arch/arm/boot/dts/exynos4212-tizenw.dts   | 926
++++++++++++++++++++++++++++++
  3 files changed, 1808 insertions(+)
  create mode 100644 arch/arm/boot/dts/exynos3250-pinctrl.dtsi
  create mode 100644 arch/arm/boot/dts/exynos3250.dtsi
  create mode 100644 arch/arm/boot/dts/exynos4212-tizenw.dts
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
new file mode 100644
index 0000000..976490b
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -0,0 +1,477 @@
+/*
+ * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *        http://www.samsung.com
+ *
+ * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are
listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+    pinctrl@11400000 {
Could you use references instead of re-specifying the whole tree
hierarchy in every file a node is used?

Instead of

/ {
     pinctrl@11400000 {

     };
};

one may simply use

&pinctrl_0 {

};

You might just need to change the location of #include
"exynos3250-pinctrl.dtsi" from top of exynos3250.dtsi to bottom of it.
Oh, well, you also should move all nodes of on-SoC devices under a simple-bus node called soc. You can see the patch adding dts file for Exynos5260 for an example [1].

[1] http://thread.gmane.org/gmane.linux.kernel.samsung-soc/29360/focus=29361

OK, I'll move nodes dependent on SoC under 'soc' dt node as example patch[1] except for 'amba-bus' dt node.

Thanks,
Chanwoo Choi
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help