[PATCHv4 7/7] ARM: dts: Add device tree sources for Exynos3250
From: cw00.choi@samsung.com (Chanwoo Choi)
Date: 2014-05-09 06:50:06
Also in:
linux-devicetree, linux-samsung-soc, lkml
Hi Tomasz, On 04/26/2014 08:38 PM, Tomasz Figa wrote:
On 26.04.2014 02:51, Tomasz Figa wrote:quoted
Hi Chanwoo, On 25.04.2014 03:16, Chanwoo Choi wrote:quoted
From: Tomasz Figa <redacted> This patch add new exynos3250.dtsi to support Exynos3250 SoC based on Cortex-A7 dual core and includes following dt nodes: - GIC interrupt controller - Pinctrl to control GPIOs - Clock controller - CPU information (Cortex-A7 dual core) - UART to support serial port - MCT (Multi Core Timer) - ADC (Analog Digital Converter) - I2C/SPI bus - Power domain - PMU (Performance Monitoring Unit) - MSHC (Mobile Storage Host Controller) - PWM (Pluse Width Modulation) - AMBA bus Signed-off-by: Tomasz Figa <redacted> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hyunhee Kim <redacted> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <redacted> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <redacted> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <redacted> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <redacted> Cc: Kumar Gala <redacted> Cc: Russell King <redacted> Cc: devicetree at vger.kernel.org --- arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 477 +++++++++++++++ arch/arm/boot/dts/exynos3250.dtsi | 405 +++++++++++++ arch/arm/boot/dts/exynos4212-tizenw.dts | 926 ++++++++++++++++++++++++++++++ 3 files changed, 1808 insertions(+) create mode 100644 arch/arm/boot/dts/exynos3250-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/exynos3250.dtsi create mode 100644 arch/arm/boot/dts/exynos4212-tizenw.dtsdiff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsib/arch/arm/boot/dts/exynos3250-pinctrl.dtsi new file mode 100644 index 0000000..976490b--- /dev/null +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi@@ -0,0 +1,477 @@ +/* + * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn arelisted as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + pinctrl at 11400000 {Could you use references instead of re-specifying the whole tree hierarchy in every file a node is used? Instead of / { pinctrl at 11400000 { }; }; one may simply use &pinctrl_0 { }; You might just need to change the location of #include "exynos3250-pinctrl.dtsi" from top of exynos3250.dtsi to bottom of it.Oh, well, you also should move all nodes of on-SoC devices under a simple-bus node called soc. You can see the patch adding dts file for Exynos5260 for an example [1]. [1] http://thread.gmane.org/gmane.linux.kernel.samsung-soc/29360/focus=29361
OK, I'll move nodes dependent on SoC under 'soc' dt node as example patch[1] except for 'amba-bus' dt node. Thanks, Chanwoo Choi