Voltage regulators are needed very early due to deferred probe
being incompatible with built-in USB gadget drivers. In order to
have the PMU driver available before USB UDC, make i2c available
during subsys_initcall.
Signed-off-by: Matt Porter <redacted>
Reviewed-by: Tim Kryger <redacted>
Reviewed-by: Markus Mayer <redacted>
---
drivers/i2c/busses/i2c-bcm-kona.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
index 18a74a6..bfd4056 100644
--- a/drivers/i2c/busses/i2c-bcm-kona.c
+++ b/drivers/i2c/busses/i2c-bcm-kona.c
@@ -901,7 +901,19 @@ static struct platform_driver bcm_kona_i2c_driver = {
.probe = bcm_kona_i2c_probe,
.remove = bcm_kona_i2c_remove,
};
-module_platform_driver(bcm_kona_i2c_driver);
+
+static int __init bcm_kona_i2c_init_driver(void)
+{
+ return platform_driver_register(&bcm_kona_i2c_driver);
+}
+/* PMU access is needed early so use subsys init */
+subsys_initcall(bcm_kona_i2c_init_driver);
+
+static void __exit bcm_kona_i2c_exit_driver(void)
+{
+ platform_driver_unregister(&bcm_kona_i2c_driver);
+}
+module_exit(bcm_kona_i2c_exit_driver);
MODULE_AUTHOR("Tim Kryger <tkryger-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>");
MODULE_DESCRIPTION("Broadcom Kona I2C Driver");--
1.8.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html