On Fri, Oct 18, 2013 at 06:37:38AM +0100, Arun Kumar K wrote:
quoted hunk ↗ jump to hunk
S5K4E5 is a Samsung raw image sensor controlled via I2C.
This patch adds the DT binding documentation for the same.
Signed-off-by: Arun Kumar K <redacted>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
.../devicetree/bindings/media/samsung-s5k4e5.txt | 45 ++++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/samsung-s5k4e5.txt
diff --git a/Documentation/devicetree/bindings/media/samsung-s5k4e5.txt b/Documentation/devicetree/bindings/media/samsung-s5k4e5.txt
new file mode 100644
index 0000000..0fca087
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung-s5k4e5.txt
@@ -0,0 +1,45 @@
+* Samsung S5K4E5 Raw Image Sensor
+
+S5K4E5 is a raw image sensor with maximum resolution of 2560x1920
+pixels. Data transfer is carried out via MIPI CSI-2 port and controls
+via I2C bus.
+
+Required Properties:
+- compatible : must be "samsung,s5k4e5"
s/must be/should contain/
+- reg : I2C device address
+- reset-gpios : specifier of a GPIO connected to the RESET pin
+- clocks : should contain the sensor's EXTCLK clock specifier, from
+ the common clock bindings
I would reword this to reference clock-names so as to make the ordering
relationship explicit.
With that, as everything else looks sane:
Acked-by: Mark Rutland <mark.rutland@arm.com>
Thanks
Mark.