[PATCH v10 01/12] exynos5-fimc-is: Add Exynos5 FIMC-IS device tree bindings documentation

@@ -0,0 +1,84 @@
+Samsung EXYNOS5 SoC series Imaging Subsystem (FIMC-IS)
+------------------------------------------------------
+
+The camera subsystem on Samsung Exynos5 SoC has some changes relative
+to previous SoC versions. Exynos5 has almost similar MIPI-CSIS and
+FIMC-LITE IPs but has a much improved version of FIMC-IS which can
+handle sensor controls and camera post-processing operations. The
+Exynos5 FIMC-IS has a dedicated ARM Cortex A5 processor, many
+post-processing blocks (ISP, DRC, FD, ODC, DIS, 3DNR) and two
+dedicated scalers (SCC and SCP).
+
+fimc-is node
+------------
+
+Required properties:
+
+- compatible        : must be "samsung,exynos5250-fimc-is"
+- reg               : physical base address and size of the memory mapped
+                      registers
+- interrupt-parent  : parent interrupt controller
+- interrupts        : fimc-is interrupt to the parent interrupt controller
+- clocks            : list of clock specifiers, corresponding to entries in
+                      clock-names property
+- clock-names       : must contain "isp", "mcu_isp", "isp_div0", "isp_div1",
+                      "isp_divmpwm", "mcu_isp_div0", "mcu_isp_div1" entries,
+                      matching entries in the clocks property
+- samsung,pmu       : phandle to the Power Management Unit (PMU) node
+
+i2c-isp (ISP I2C bus controller) nodes
+--------------------------------------
+The i2c-isp node is defined as the child node of fimc-is.
+
+Required properties:
+
+- compatible	: should be "samsung,exynos4212-i2c-isp" for Exynos4212,
+		  Exynos4412 and Exynos5250 SoCs
+- reg		: physical base address and length of the registers set
+- clocks	: must contain gate clock specifier for this controller
+- clock-names	: must contain "i2c_isp" entry
+
+For the i2c-isp node, it is required to specify a pinctrl state named "default",
+according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt.
+
+Device tree nodes of the image sensors controlled directly by the FIMC-IS
+firmware must be child nodes of their corresponding ISP I2C bus controller node.
+The data link of these image sensors must be specified using the common video
+interfaces bindings, defined in video-interfaces.txt.
+
+Example:
+
+	fimc_is: fimc-is@13000000 {
+		compatible = "samsung,exynos5250-fimc-is";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		reg = <0x13000000 0x200000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <19 1>;
+		clocks = <&clock 346>, <&clock 347>, <&clock 512>,
+			<&clock 513>, <&clock 514>, <&clock 515>,
+			<&clock 516>;
+		clock-names = "isp", "mcu_isp", "isp_div0", "isp_div1",
+				"isp_divmpwm", "mcu_isp_div0",
+				"mcu_isp_div1";
+		samsung,pmu = <&pmu>;
+
+		i2c0_isp: i2c-isp@13130000 {
+			compatible = "samsung,exynos4212-i2c-isp";
+			reg = <0x13130000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock 352>;
+			clock-names = "i2c_isp";
+		};
+
+		i2c1_isp: i2c-isp@13140000 {
+			compatible = "samsung,exynos4212-i2c-isp";
+			reg = <0x13140000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock 353>;
+			clock-names = "i2c_isp";
+		};
+	};