Cc: Rob Herring <redacted>
Cc: Pawel Moll <redacted>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <redacted>
Cc: Ian Campbell <redacted>
Cc: devicetree@vger.kernel.org
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Lothar Waßmann <redacted>
Cc: Eric Bénard <redacted>
Signed-off-by: Denis Carikli <redacted>
---
ChangeLog v6->v7:
- One small whitespace cleanup.
- The properties specific to that driver are now prefixed with "ti,".
- The ti,fuzzy property has now better documentation.
---
 .../bindings/input/touchscreen/tsc2007.txt         |   45 +++++
 drivers/input/touchscreen/tsc2007.c                |  194 +++++++++++++++-----
 2 files changed, 198 insertions(+), 41 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt

diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
new file mode 100644
index 0000000..516b63b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt

@@ -0,0 +1,45 @@
+* Texas Instruments tsc2007 touchscreen controller
+
+Required properties:
+- compatible: must be "ti,tsc2007".
+- reg: I2C address of the chip.
+- ti,x-plate-ohms: X-plate resistance in ohms.
+
+Optional properties:
+- gpios: the interrupt gpio the chip is connected to (trough the penirq pin)
+  (see GPIO binding[2] for more details).
+- interrupt-parent: the phandle for the gpio controller
+  (see interrupt binding[1]).
+- interrupts: (gpio) interrupt to which the chip is connected
+  (see interrupt binding[1]).
+- pinctrl-0: Should specify pin control groups used for the gpio
+  (see pinctrl bindings[0]).
+- pinctrl-names: Should contain only one value - "default"
+  (see pinctrl bindings[0]).