[PATCH v4 1/3] devicetree: create a separate binding description for sata_highbank
From: Mark Langsdorf <hidden>
Date: 2013-08-14 18:23:37
Also in:
linux-ide, lkml
Subsystem:
libata subsystem (serial and parallel ata drivers), open firmware and flattened device tree bindings, the rest · Maintainers:
Damien Le Moal, Niklas Cassel, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The Calxeda sata_highbank driver has been adding its descriptions to the ahci driver. Separate them properly. This patch only affects documentation and has no functional component. Signed-off-by: Mark Langsdorf <redacted> Acked-by: Rob Herring <redacted> --- Changes from v3 Added all optional properties to the example. Expanded the description. Renumbered the patch series since the first two got accepted. Changes from v2 Fixed some indenting. Changes from v1 None. Documentation/devicetree/bindings/ata/sata_highbank.txt | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt
index 1ac6d3d..e7a6f28 100644
--- a/Documentation/devicetree/bindings/ata/sata_highbank.txt
+++ b/Documentation/devicetree/bindings/ata/sata_highbank.txt@@ -12,7 +12,7 @@ Required properties: Optional properties: - dma-coherent : Present if dma operations are coherent -- calxeda,port-phys: phandle-combophy and lane assignment, which maps each +- calxeda,port-phys : phandle-combophy and lane assignment, which maps each SATA port to a combophy and a lane within that combophy - calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
@@ -26,7 +26,9 @@ Example: compatible = "calxeda,hb-ahci"; reg = <0xffe08000 0x1000>; interrupts = <115>; + dma-coherent; calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1 &combophy0 2 &combophy0 3>; - + calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>; + calxeda,led-order = <4 0 1 2 3>; };
--
1.8.1.2