From: "Ivan T. Ivanov" <redacted>

Hi,

These patches add basic support for USB3.0 controllers found
on MSM platforms. USB3.0 core is based on Synopsys DesignWare 
SuperSpeed IP. 

Changes since v2:
* Several improvements in devicetree bindings description
* Disable regulators in glue layer if there is error during 
  ioremap.

Changes since first version:
* Split devicetree bindings description file to separate patch
* Address comments for device bindings description
* Fix typo in 'gdsc' requlator name.

Generated on top of Felipe 'testing' branch.

Regards,
Ivan

Ivan T. Ivanov (3):
  usb: dwc3: msm: Add device tree binding information
  usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
  usb: dwc3: Add Qualcomm DWC3 glue layer driver

 .../devicetree/bindings/usb/msm-ssusb.txt          |  108 ++++++
 drivers/usb/dwc3/Kconfig                           |    8 +
 drivers/usb/dwc3/Makefile                          |    1 +
 drivers/usb/dwc3/dwc3-msm.c                        |  169 +++++++++
 drivers/usb/phy/Kconfig                            |   11 +
 drivers/usb/phy/Makefile                           |    2 +
 drivers/usb/phy/phy-msm-dwc3-hs.c                  |  336 +++++++++++++++++
 drivers/usb/phy/phy-msm-dwc3-ss.c                  |  383 ++++++++++++++++++++
 8 files changed, 1018 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/msm-ssusb.txt
 create mode 100644 drivers/usb/dwc3/dwc3-msm.c
 create mode 100644 drivers/usb/phy/phy-msm-dwc3-hs.c
 create mode 100644 drivers/usb/phy/phy-msm-dwc3-ss.c

-- 
1.7.9.5