+ Grant

On Thu, Aug 1, 2013 at 5:10 PM, Kumar Gala [off-list ref] wrote:

quoted

On Jul 29, 2013, at 4:40 PM, Stephen Boyd wrote:

quoted

On 07/29, Kumar Gala wrote:

quoted

quoted

diff --git a/Documentation/devicetree/bindings/arm/msm/tcsr-mutex.txt b/Documentation/devicetree/bindings/arm/msm/tcsr-mutex.txt
new file mode 100644
index 0000000..ddd6889
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/tcsr-mutex.txt

Maybe this should go under a new hwspinlock directory?

Will look for Ohad to comment on this.

quoted

quoted

quoted

@@ -0,0 +1,20 @@
+Qualcomm MSM Hardware Mutex Block:
+
+The hardware block provides mutexes utilized between different processors
+on the SoC as part of the communication protocol used by these processors.
+
+Required properties:
+- compatible: should be "qcom,tcsr-mutex"
+- reg: Should contain registers location and length of mutex registers
+- reg-names:
+  "mutex-base"  - string to identify mutex registers
+- qcom,num-locks: the number of locks/mutexes supported
+
+Example:
+
+  qcom,tcsr-mutex@fd484000 {

Maybe it should be hw-mutex@fd484000?

again, will look for Ohad to make some comment on this.

quoted

quoted

quoted

+          compatible = "qcom,tcsr-mutex";
+          reg = <0xfd484000 0x1000>;
+          reg-names = "mutex-base";
+          qcom,num-locks = <32>;
+  };

Ohad, ping.

I'd prefer a DT maintainer to take a look at your two open questions
above, especially if I'm to merge a new file into the devicetree
Documentation folder.

Grant, any chance you have a moment to take a look?

Otherwise, Stephen - do we have your Ack here? I was happy to see your
review but not sure what's the latest status.

Thanks,
Ohad.