Thread (7 messages) 7 messages, 4 authors, 2012-08-28

Re: [PATCH v3 3/4] arm/dts: AM33XX: Configure pinmuxs for D_CAN1 on AM335x-EVM

From: Vaibhav Hiremath <hidden>
Date: 2012-08-28 06:21:32
Also in: linux-arm-kernel, linux-omap


On 8/25/2012 1:44 AM, Tony Lindgren wrote:
* AnilKumar Ch [off-list ref] [120816 05:20]:
quoted
Add D_CAN1 pinctrl node to am3358_pinmux master node to export
D_CAN functionality on AM335x EVM according to pinctrl-single
driver.

Signed-off-by: AnilKumar Ch <redacted>
---
Changes from v2:
	- Incorporated Vaibhav H's comments on v2
	  * Added dcan0 instances to am33xx.dtsi file

Changes from v1:
	- These two patches separated from c_can DT support
	  patch series.

 arch/arm/boot/dts/am335x-evm.dts |   12 ++++++++++++
 1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 5dd8a6b..a64c30a 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -18,6 +18,18 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	am3358_pinmux: pinmux@44E10800 {
This should be just &am3358_pinmux as you already include it.
I think it won't work this way, it will result into syntax error.
The reason being is, unlike OMAP (and like other platforms, like, imx)
here we are again representing device hierarchy starting from root,

am335x-evm.dts:
/ {

	ocp {
		...
	};

};

Although I am not too familiar with DTS compiler, but below code results
in syntax error:

am335x-evm.dts:
/ {

	ocp {
		...
		&am3358_pinmux {
			...
		};
	};

};


Thanks,
Vaibhav
quoted
+		pinctrl-names = "default";
+		pinctrl-0 = <&d_can1_pins>;
+
+		d_can1_pins: pinmux_d_can_pins {
+			pinctrl-single,pins = <
+				0x168 0x2	/* uart0_ctsn.d_can1_tx, OUTPUT | MODE2 */
+				0x16C 0x32	/* uart0_rtsn.d_can1_rx, INPUT_PULLUP | MODE2 */
+			>;
+		};
+	};
+
It would better to claim these pins in the dcan driver entry
rather than set them as pins enabled by the pinctrl driver.
The reason is that in case you want to enable runtime PM related
stuff, like some more advanced wake-up features, for the rx pin
you can do it in the driver.

Then one nit.. Please lowercase all hex number in this series as that's the style
here.

Regards,

Tony
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help