[PATCH v4 2/4] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone
From: AnilKumar Ch <hidden>
Date: 2012-08-16 12:20:08
Also in:
linux-arm-kernel, linux-omap
Subsystem:
the rest · Maintainer:
Linus Torvalds
Adds GPIO pinctrl nodes to am3358_pinmux master node to control user leds (USR0, USR1, USR2 and USR3) present on BeagleBone. Signed-off-by: AnilKumar Ch <redacted> --- arch/arm/boot/dts/am335x-bone.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index a7906cb..58f5042 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts@@ -18,6 +18,20 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am3358_pinmux: pinmux@44E10800 { + pinctrl-names = "default"; + pinctrl-0 = <&userled_pins>; + + userled_pins: pinmux_userled_pins { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ + 0x5C 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + >; + }; + }; + ocp { uart1: serial@44E09000 { status = "okay";
--
1.7.9.5