[PATCH v4 3/3] tegra: add pwm backlight device tree nodes

@@ -317,6 +317,64 @@
 		bus-width = <8>;
 	};
 
+	backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
+		default-brightness-level = <12>;
+
+		/* resources used by the power sequences */
+		pwms = <&pwm 2 5000000>;
+		pwm-names = "backlight";
+		power-supply = <&backlight_reg>;
+		enable-gpio = <&gpio 28 0>;
+
+		power-on-sequence {
+			step0 {
+				regulator = "power";
+				enable;
+			};
+			step1 {
+				delay = <10000>;
+			};
+			step2 {
+				pwm = "backlight";
+				enable;
+			};
+			step3 {
+				gpio = "enable";
+				enable;
+			};
+		};
+		power-off-sequence {
+			step0 {
+				gpio = "enable";
+				disable;
+			};
+			step1 {
+				pwm = "backlight";
+				disable;
+			};
+			step2 {
+				delay = <10000>;
+			};
+			step3 {
+				regulator = "power";
+				disable;
+			};
+		};
+	};
+
+	backlight_reg: fixedregulator@176 {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight_regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio 176 0>;
+		startup-delay-us = <0>;
+		enable-active-high;
+		regulator-boot-off;
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-wm8903-ventana",
 			     "nvidia,tegra-audio-wm8903";

@@ -123,7 +123,7 @@
 		status = "disabled";
 	};
 
-	pwm {
+	pwm: pwm {
 		compatible = "nvidia,tegra20-pwm";
 		reg = <0x7000a000 0x100>;
 		#pwm-cells = <2>;