Shawn Guo wrote at Tuesday, January 10, 2012 6:05 AM:

On Tue, Jan 10, 2012 at 08:21:05AM +0000, Dong Aisheng-B29396 wrote:

quoted

Here what I wonder is that do we need to allow the platform to use a func-name
property in their pinmux func node or pinmux group node to specify the name.

I do not see the necessity.

quoted

If it is allowed, then it could be flexible for soc to define their names.
If not there may be limitations on their node names since we can only get it from
the node name.

To me, the node name is perfectly fine to be used for that purpose.

I'd prefer if we could use integers over strings if at all possible, but
that does have a dependency on dtc getting a syntax to define named
constants, or the kernel pre-processing the .dts files before passing
them to dtc.

But if we have to use strings, I will point out that the pin names I
chose for Tegra may not be suitable as DT node names; I don't /think/
the DT node names can contain spaces, but I chose to name the Tegra
pinctrl pins after both their pin name and GPIO name so that it's
easier to correlate the two:

        PINCTRL_PIN(TEGRA_PIN_SDIO3_CLK_PA6, "SDIO3_CLK PA6"),

Now, I could change that, but I'd prefer not to.

-- 
nvpublic