[PATCH v1 14/15] WIP: PCI: qcom: use pwrseq to power up bus devices
From: Dmitry Baryshkov <hidden>
Date: 2021-10-06 03:56:35
Also in:
linux-arm-msm, linux-mmc, linux-wireless, lkml, netdev
Subsystem:
arm/qualcomm mailing list, pci native host bridge and endpoint drivers, pci subsystem, pcie driver for qualcomm msm, the rest · Maintainers:
Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
Use bus-pwrseq device tree node to power up the devices on the bus. This is to be rewritten with the proper code parsing the device tree and powering up individual devices. Signed-off-by: Dmitry Baryshkov <redacted> --- drivers/pci/controller/dwc/pcie-qcom.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 8a7a300163e5..f398283912c7 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c@@ -23,6 +23,7 @@ #include <linux/pm_runtime.h> #include <linux/platform_device.h> #include <linux/phy/phy.h> +#include <linux/pwrseq/consumer.h> #include <linux/regulator/consumer.h> #include <linux/reset.h> #include <linux/slab.h>
@@ -1467,6 +1468,7 @@ static int qcom_pcie_probe(struct platform_device *pdev) struct pcie_port *pp; struct dw_pcie *pci; struct qcom_pcie *pcie; + struct pwrseq *pwrseq; int ret; pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
@@ -1520,6 +1522,17 @@ static int qcom_pcie_probe(struct platform_device *pdev) pp->ops = &qcom_pcie_dw_ops; + pwrseq = devm_pwrseq_get(dev, "bus"); + if (IS_ERR(pwrseq)) { + ret = PTR_ERR(pwrseq); + goto err_pm_runtime_put; + } + if (pwrseq) { + ret = pwrseq_full_power_on(pwrseq); + if (ret) + goto err_pm_runtime_put; + } + ret = phy_init(pcie->phy); if (ret) { pm_runtime_disable(&pdev->dev);
--
2.33.0