When [GATT] Cache = yes is set in configuration BlueZ does not use
cached UUIDs for the list of service UUIDs. However, it doesn't clear
the in-memory list of UUIDs received from advertising data, so when
a device is scanned, connected and disconnected, the internal state
still reflects that the UUIDs from the advertising data have already
been handled. device_add_eir_uuids() ignored the UUIDs from the
advertising data because both dev->le_state.svc_resolved == true and
dev->eir_uuids still contains the UUIDs from the previous scan session.
This fixes the issue by resetting both le_state.svc_resolved and
eir_uuids when the device is disconnected.
Issue: https://github.com/bluez/bluez/issues/192
Signed-off-by: David Lechner <david@lechnology.com>
---
src/device.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/src/device.c b/src/device.c
index 807106812..48b9bd8d6 100644
--- a/src/device.c
+++ b/src/device.c
@@ -3129,6 +3129,12 @@ void device_remove_connection(struct btd_device *device, uint8_t bdaddr_type)
device_update_last_seen(device, bdaddr_type);
+ if (!gatt_cache_is_enabled(device)) {
+ device->le_state.svc_resolved = false;
+ g_slist_free_full(device->eir_uuids, g_free);
+ device->eir_uuids = NULL;
+ }
+
g_dbus_emit_property_changed(dbus_conn, device->path,
DEVICE_INTERFACE, "Connected");
--
2.25.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=536697
---Test result---
Test Summary:
CheckPatch PASS 0.40 seconds
GitLint PASS 0.11 seconds
Prep - Setup ELL PASS 40.29 seconds
Build - Prep PASS 0.10 seconds
Build - Configure PASS 7.06 seconds
Build - Make PASS 176.14 seconds
Make Check PASS 8.49 seconds
Make Distcheck PASS 206.82 seconds
Build w/ext ELL - Configure PASS 7.13 seconds
Build w/ext ELL - Make PASS 165.68 seconds
Details
##############################
Test: CheckPatch - PASS
Desc: Run checkpatch.pl script with rule in .checkpatch.conf
##############################
Test: GitLint - PASS
Desc: Run gitlint with rule in .gitlint
##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL
##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build
##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree
##############################
Test: Build - Make - PASS
Desc: Build the BlueZ source tree
##############################
Test: Make Check - PASS
Desc: Run 'make check'
##############################
Test: Make Distcheck - PASS
Desc: Run distcheck to check the distribution
##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration
##############################
Test: Build w/ext ELL - Make - PASS
Desc: Build BlueZ source with '--enable-external-ell' configuration
---
Regards,
Linux Bluetooth
Hi David,
On Tue, Aug 24, 2021 at 12:00 PM David Lechner [off-list ref] wrote:
quoted hunk
When [GATT] Cache = yes is set in configuration BlueZ does not use
cached UUIDs for the list of service UUIDs. However, it doesn't clear
the in-memory list of UUIDs received from advertising data, so when
a device is scanned, connected and disconnected, the internal state
still reflects that the UUIDs from the advertising data have already
been handled. device_add_eir_uuids() ignored the UUIDs from the
advertising data because both dev->le_state.svc_resolved == true and
dev->eir_uuids still contains the UUIDs from the previous scan session.
This fixes the issue by resetting both le_state.svc_resolved and
eir_uuids when the device is disconnected.
Issue: https://github.com/bluez/bluez/issues/192
Signed-off-by: David Lechner <david@lechnology.com>
---
src/device.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/src/device.c b/src/device.c
index 807106812..48b9bd8d6 100644
--- a/src/device.c
+++ b/src/device.c
@@ -3129,6 +3129,12 @@ void device_remove_connection(struct btd_device *device, uint8_t bdaddr_type)
device_update_last_seen(device, bdaddr_type);
+ if (!gatt_cache_is_enabled(device)) {
+ device->le_state.svc_resolved = false;
+ g_slist_free_full(device->eir_uuids, g_free);
+ device->eir_uuids = NULL;
+ }
We might want to cleanup the eir_uuid regardless of the cache being
enabled, since the next time the device advertise it may have
completely different UUIDs, as for resetting the svc_resolved Id guess
it would be better placed at gatt_cache_cleanup since that is clearing
the db it means should be cache left with should also set svc_resolved
= false.
g_dbus_emit_property_changed(dbus_conn, device->path,
DEVICE_INTERFACE, "Connected");
--
2.25.1
--
Luiz Augusto von Dentz