[PATCH 2/3] dt-bindings: net: btusb: add QCA6174A IDs
From: Brian Norris <briannorris@chromium.org>
Date: 2019-02-22 00:34:17
Also in:
linux-arm-kernel, linux-devicetree, linux-rockchip, lkml
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
There are two USB PID/VID variations I've seen for this chip, and I want to utilize the 'interrupts' property defined here already. Signed-off-by: Brian Norris <briannorris@chromium.org> --- Documentation/devicetree/bindings/net/btusb.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt
index 37d67926dd6d..43c96c3380a6 100644
--- a/Documentation/devicetree/bindings/net/btusb.txt
+++ b/Documentation/devicetree/bindings/net/btusb.txt@@ -9,6 +9,9 @@ Required properties: (more may be added later) are: "usb1286,204e" (Marvell 8997) + "usb0cf3,e300" (Qualcomm QCA6174A) + "usb04ca,301a" (Qualcomm QCA6174A (Lite-On)) + Also, vendors that use btusb may have device additional properties, e.g: Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
--
2.21.0.rc0.258.g878e2cd30e-goog