Re: [PATCH 00/14] Add support for FM radio in hcill and kill TI_ST
From: Adam Ford <hidden>
Date: 2018-12-22 20:36:48
Also in:
linux-media, linux-omap, lkml
On Sat, Dec 22, 2018 at 11:09 AM Tony Lindgren [off-list ref] wrote:
* Sebastian Reichel [off-list ref] [181221 01:18]:quoted
The new code has been tested on the Motorola Droid 4. For testing the audio should be configured to route Ext to Speaker or Headphone. Then you need to plug headphone, since its cable is used as antenna. For testing there is a 'radio' utility packages in Debian. When you start the utility you need to specify a frequency, since initial get_frequency returns an error:Nice, good to see that ti-st kim stuff gone :) I gave this a quick
Tony, As much as I'd like to see the ti-st kim stuff go, I am not able to load the Bluetooth on the Torpedo board (wl1283). The hooks on a different, wl18xx and 127x board work fine. I am not sure if there is anything different about the wl1283, but I don't have any other boards other than the Logic PD Torpedo kit. Do you have any wl1283 boards to test? I'd like to see this BT timeout stuff resolved before we dump the ti-st kim stuff, otherwise, I'll forever be porting drivers. :-( adam
quoted hunk ↗ jump to hunk
try using fmtools.git and fmscan works just fine. No luck yet with fm though, it gives VIDIOC_G_CTRL: Not a tty error somehow so maybe I'm missing some options, patch below for omap2plus_defconfig. Hmm so looks like nothing to configure for the clocks or CPCAP_BIT_ST_L_TIMESLOT bits for cap for the EXT? So the wl12xx audio is wired directly to cpcap EXT then and not a TDM slot on the mcbsp huh?quoted
Merry Christmas!Same to you! Tony 8< -------------------------------- From tony Mon Sep 17 00:00:00 2001 From: Tony Lindgren <tony@atomide.com> Date: Fri, 21 Dec 2018 07:57:09 -0800 Subject: [PATCH] ARM: omap2plus_defconfig: Add RADIO_WL128X as a loadable module This allows using the FM radio in the wl12xx chips after modprobe fm_drv using radio from xawt, or fmtools. Note that the firmware placed into /lib/firmware/ti-connectivity directory: fm_rx_ch8_1283.2.bts fmc_ch8_1283.2.bts Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/configs/omap2plus_defconfig | 3 +++ 1 file changed, 3 insertions(+)diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig@@ -126,6 +126,7 @@ CONFIG_AF_RXRPC=m CONFIG_RXKAD=y CONFIG_CFG80211=m CONFIG_MAC80211=m +CONFIG_RFKILL=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y@@ -343,12 +344,14 @@ CONFIG_IR_GPIO_TX=m CONFIG_IR_PWM_TX=m CONFIG_MEDIA_SUPPORT=m CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_RADIO_SUPPORT=y CONFIG_MEDIA_CEC_SUPPORT=y CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_OMAP3=m CONFIG_CEC_PLATFORM_DRIVERS=y +CONFIG_RADIO_WL128X=m # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_TVP5150=m CONFIG_DRM=m --2.19.2