Re: BCM43430 BT driver almost working...

On 30/06/17 18:02, Marcel Holtmann wrote:

If you have an embedded board with a proper DT definition, and the
UART is hard-wired to the Bluetooth chip, then go for serdev. It
means no btattach is needed. The kernel will enumerate this properly
for you. That is the way forward. Someone needed to adapt the
hci_bcm.c driver for this anyway. It just happens that you are the
first one.

Right - I'll follow that route and add serdev support to hci_bcm.c then!

Thanks,

-Ian