[RFCv2 bluetooth-next 17/19] 6lowpan: move multicast flags to generic
flat view
STALE3619d
From: Alexander Aring <hidden>
Date: 2016-08-07 14:30:54
Subsystem:
6lowpan generic (btle/ieee 802.15.4), ieee 802.15.4 subsystem, networking [general], the rest · Maintainers:
Alexander Aring, Stefan Schmidt, Miquel Raynal, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v1 of 2 in this series.
Revisions (2)
- rfc [diff vs current]
- v1 current
These flags should be all the same for 6LoWPAN so move it to 6LoWPAN generic. Signed-off-by: Alexander Aring <redacted> --- net/6lowpan/core.c | 1 + net/ieee802154/6lowpan/core.c | 1 - 2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/6lowpan/core.c b/net/6lowpan/core.c
index a978000..6b7de14 100644
--- a/net/6lowpan/core.c
+++ b/net/6lowpan/core.c@@ -62,6 +62,7 @@ int lowpan_register_netdevice(struct net_device *dev, dev->type = ARPHRD_6LOWPAN; dev->mtu = IPV6_MIN_MTU; dev->priv_flags |= IFF_NO_QUEUE; + dev->flags = IFF_BROADCAST | IFF_MULTICAST; dev->header_ops = &header_ops;
diff --git a/net/ieee802154/6lowpan/core.c b/net/ieee802154/6lowpan/core.c
index 228a711..a60abad 100644
--- a/net/ieee802154/6lowpan/core.c
+++ b/net/ieee802154/6lowpan/core.c@@ -92,7 +92,6 @@ static void lowpan_setup(struct net_device *ldev) memset(ldev->broadcast, 0xff, IEEE802154_ADDR_LEN); /* We need an ipv6hdr as minimum len when calling xmit */ ldev->hard_header_len = sizeof(struct ipv6hdr); - ldev->flags = IFF_BROADCAST | IFF_MULTICAST; ldev->netdev_ops = &lowpan_netdev_ops; ldev->destructor = free_netdev;
--
2.9.2