[RFC bluetooth-next 19/20] 6lowpan: delete addr_len handling to generic
flat view
From: Alexander Aring <hidden>
Date: 2016-07-11 19:50:43
Subsystem:
6lowpan generic (btle/ieee 802.15.4), ieee 802.15.4 subsystem, networking [general], the rest · Maintainers:
Alexander Aring, Stefan Schmidt, Miquel Raynal, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The address length for BTLE 6LoWPAN is not 8 bytes, it's 6 bytes. We need to move this setting away from generic branch. Signed-off-by: Alexander Aring <redacted> --- net/6lowpan/core.c | 1 - net/ieee802154/6lowpan/core.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/6lowpan/core.c b/net/6lowpan/core.c
index 6b7de14..e03cecf 100644
--- a/net/6lowpan/core.c
+++ b/net/6lowpan/core.c@@ -58,7 +58,6 @@ int lowpan_register_netdevice(struct net_device *dev, { int i, ret; - dev->addr_len = EUI64_ADDR_LEN; dev->type = ARPHRD_6LOWPAN; dev->mtu = IPV6_MIN_MTU; dev->priv_flags |= IFF_NO_QUEUE;
diff --git a/net/ieee802154/6lowpan/core.c b/net/ieee802154/6lowpan/core.c
index a60abad..c97eb7a 100644
--- a/net/ieee802154/6lowpan/core.c
+++ b/net/ieee802154/6lowpan/core.c@@ -134,6 +134,7 @@ static int lowpan_newlink(struct net *src_net, struct net_device *ldev, } lowpan_802154_dev(ldev)->wdev = wdev; + ldev->addr_len = IEEE802154_ADDR_LEN; /* Set the lowpan hardware address to the wpan hardware address. */ memcpy(ldev->dev_addr, wdev->dev_addr, IEEE802154_ADDR_LEN); /* We need headroom for possible wpan_dev_hard_header call and tailroom
--
2.9.0