RE: [PATCH] hciattach: Add support for Marvell Bluetooth device

Hi Marcel,

-----Original Message-----
From: Marcel Holtmann [mailto:marcel@holtmann.org]
Sent: Friday, January 29, 2016 4:50 PM
To: Amitkumar Karwar
Cc: linux-bluetooth@vger.kernel.org; Cathy Luo; Nishant Sarmukadam;
Ganapathi Bhat
Subject: Re: [PATCH] hciattach: Add support for Marvell Bluetooth device
=20
Hi Amitkumar,
=20

quoted

This patch enables the Marvell Bluetooth device (UART sku) over the H4
protocol. It configures the baudrate and download firmware to bring up
the device.

Command syntax: hciattach /dev/ttyUSB0 marvell

Make sure to place the marvell_hci_uart.conf file in
/lib/firmware/mrvl/

This file should contain below info:
HELPER_FILE_PATH=3D<full path of helper binary> FIRMWARE_FILE_PATH=3D<f=

ull

quoted

path of firmware binary> FIRMWARE_DOWNLOAD_BAUD_RATE=3D<firmware
download baud rate>

Thanks for your review comments.
We have decided to push firmware download support in hci_uart driver first.
We will address your comments and come up with V2 patch later.

Regards,
Amitkumar Karwar