Re: example GATT code to talk with a sensortag

On Wed, Jan 13, 2016 at 10:44:02PM +0100, Łukasz Rymanowski wrote:

quoted

Thank you!


I did _not_ see GattCharacteristic1 in the output, nor do I see either
GattService or GattCharacteristic1 show up as an interface in either
/org/bluez/hci0/dev_XXXXX or /org/bluez/hci0.


Did I miss a step or misunderstand your suggestion?

You got it well.
To be more clear.
If your bluetoothd runs with -E option and you connect to BLE device
which expose any GATT services, after connect you should see new
objects paths. Smth like this:

a) /org/bluez/hci0/dev_XXXXX/servicexxxx
b) /org/bluez/hci0/dev_XXXXX/servicexxxx/charyyyy
c) /org/bluez/hci0/dev_XXXXX/servicexxxx/charzzzz

etc.

Inside a) you should see GattService1 and inside b) and c) GattCharacteristic1

Just make sure -E is there and if still not work, provide btmon.log

Some days are better than others.  After rebooting yesterday, my bluetooth
device stopped working... so while I am excited to test your suggestion, I
am stuck trying to make it work again.  So I apologize if my response comes
later.  I do appreciate the tips and patience!

Hopefully tomorrow things will work again.. :-/

Cheers,
Don