Re: bluez/android

Hi Prabhu,

On Monday 15 June 2015 20:29:25 Prabhu Chawandi wrote:

Hi Szymon,

 Sorry for posting with ML, my mistake.

Yet, you still top post.

Thanks for the information.  Again, I was trying to find where the
unknown AT Commands are coming;
I tried to catch @ static void at_cmd_unknown(const char *command,
void *user_data);
But, no luck, no AT commands are caught there.  If you can let me
know, where all the AT commands will be handled would be of great help
( unknown - so that I can handle then)

Please check "android/hardware/bt_hf.h". Most commands that are not handled 
internally by BfA have dedicated callbacks. unknown_cmd callback is mostly for 
vendor specific commands and you can safely always just answer with ERROR for 
unknown command.
 

ManYThanks
Prabhu

On Mon, Jun 15, 2015 at 7:45 PM, Szymon Janc [off-list ref] wrote:

quoted

Hi Prabhu,

On Monday 15 of June 2015 19:11:32 Prabhu Chawandi wrote:

quoted

Hi Szymon,

   Thanks for your reply. I was debugging further, I noticed that

while connecting at service level, there is CIND callback
(cind_cmd_cb) is coming which is for Call Indicator AT CMD.
I am curious to know, how it is happening, which can help me to
understand and  try for other call backs.

Please don't top-post on ML.

As for your question: HFP HAL has methods that should be called as a reply
for some callbacks ie for cind that would be cind_response. You can check
"android/hardware/bt_hf.h".

Yet, Android HAL is rather lowlevel interface not recommended for direct
use. If for whatever reason you are stuck with it I suggest checking
Android Framework source code as this (and header comments) is the only
documentation you get for it.

quoted

On Mon, Jun 15, 2015 at 5:42 PM, Szymon Janc [off-list ref] 

wrote:

quoted

quoted

quoted

Hi Prabhu,

On Monday 15 of June 2015 17:06:41 Prabhu Chawandi wrote:

quoted

 This is with respect to HFP profile.

While I pressed the Button on my HF device, service level connection
is happening - BTHF_STATE_CONNECTED is coming.

But next callbacks are not coming on pressing of buttons - like voice
recognition.

Can any body help me

HFP is a bit special since BfA provides only part of the implementation
and
rest is implemented in Android Framework. When HF device is connected
SLC
creation must happen. Most likely your HF device is sending some AT
commands and you must response to those as per HFP specification. Only
when all required SLC AT commands are handled state will be set to
BTHF_STATE_SCL_CONNECTED. This is normally handled by Android Framework
but if you are using haltest you must handle those on your own.

For details on how to setup SLC I recommend HFP specification lecture.

--
BR
Szymon Janc

--
BR
Szymon Janc

--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth"
in the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Szymon K. Janc
szymon.janc@gmail.com