[PATCH v4 0/4] Broadcom Bluetooth UART device driver

v4 - 	Make idle-timeout the device tree parameter
	Keep speeds both in the line discipline and in the protocol
	Remove unnecessary checks and traces
v3 -	Renamed brcm device into bcm.
	Allowed for the Broadcom protocol running without Broadcom device
		at the request of Loic Poulain.
	Introduced structure definitions for vendor specific commands.
	Transferred init-speed and oper-speed from protocol into the
		line discipline as they are configurable.
	Introduced hci_uart_init_tty function.
	Removed driver specific Kconfig menu option.
	Introduced protocol timer helper function.
	Converted single driver control dispatch routine into individual
		action routines & removed interface versioning.
	Eliminated specific firmware file name.
	Removed excessive tracing.
	Took care of numerous other comments from Marcel.
v2 -	Release upon the acceptance of Fred's updates, updated as per
		the latest comments from Marcel.
v1 -	Original release against the Fred Danis' updates.

Ilya Faenson (4):
  Broadcom Bluetooth UART Device Tree bindings
  hci_uart: line discipline enhancements
  btbcm_uart: Broadcom UART Platform Driver
  hci_bcm: Broadcom UART protocol enhancements

 .../devicetree/bindings/net/bluetooth/btbcm.txt    |  86 ++++
 drivers/bluetooth/Makefile                         |   1 +
 drivers/bluetooth/btbcm_uart.c                     | 538 +++++++++++++++++++++
 drivers/bluetooth/btbcm_uart.h                     |  74 +++
 drivers/bluetooth/hci_bcm.c                        | 340 ++++++++++++-
 drivers/bluetooth/hci_ldisc.c                      | 106 +++-
 drivers/bluetooth/hci_uart.h                       |   7 +
 7 files changed, 1137 insertions(+), 15 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/bluetooth/btbcm.txt
 create mode 100644 drivers/bluetooth/btbcm_uart.c
 create mode 100644 drivers/bluetooth/btbcm_uart.h

-- 
1.9.1