Re: [PATCH] bluetooth: ath3k: added Atheros AR3012 with ID 0x0b05:0x17d0
From: Bela Hausmann <hidden>
Date: 2014-02-27 22:54:28
Hi Marcel, sorry for the messed up tabs. Here is /sys/kernel/debug/usb/devices: T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=17d0 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms An again the patch. Best wishes, Bela This adds support for the Atheros AR3012 chipset on the ASUS Z87-Pro (C2) mainboard (ID 0x0b05:0x17d0). Signed-off-by: Bela Hausmann <redacted> --- diff -uprN -X linux-3.13.5-gentoo/Documentation/dontdiff linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c
--- linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c 2014-01-20 03:40:07.000000000 +0100
+++ linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c 2014-02-27 20:09:33.047878117 +0100@@ -97,6 +97,7 @@ static const struct usb_device_id ath3k_ { USB_DEVICE(0x13d3, 0x3402) }, { USB_DEVICE(0x0cf3, 0x3121) }, { USB_DEVICE(0x0cf3, 0xe003) }, + { USB_DEVICE(0x0b05, 0x17d0) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) },
@@ -140,6 +141,7 @@ static const struct usb_device_id ath3k_ { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
diff -uprN -X linux-3.13.5-gentoo/Documentation/dontdiff linux-3.13.5-gentoo/drivers/bluetooth/btusb.c linux-3.13.5-gentoo-bela/drivers/bluetooth/btusb.c
--- linux-3.13.5-gentoo/drivers/bluetooth/btusb.c 2014-01-20 03:40:07.000000000 +0100
+++ linux-3.13.5-gentoo-bela/drivers/bluetooth/btusb.c 2014-02-27 20:10:20.825905643 +0100@@ -164,6 +164,7 @@ static const struct usb_device_id blackl { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
On 27/02/14 23:43, Marcel Holtmann wrote:
Hi Bela,quoted
This adds support for the Atheros AR3012 chipset on the ASUS Z87-Pro (C2) mainboard (ID 0x0b05:0x17d0).include the content of /sys/kernel/debug/usb/devices for this controller.quoted
Signed-off-by: Bela Hausmann <redacted> --- diff -uprN -X linux-3.13.5-gentoo/Documentation/dontdiff linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c--- linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c 2014-01-20 03:40:07.000000000 +0100 +++ linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c 2014-02-27 20:09:33.047878117 +0100@@ -97,6 +97,7 @@ static const struct usb_device_id ath3k_ { USB_DEVICE(0x13d3, 0x3402) }, { USB_DEVICE(0x0cf3, 0x3121) }, { USB_DEVICE(0x0cf3, 0xe003) }, + { USB_DEVICE(0x0b05, 0x17d0) },Make sure that you email client does not screw up tabs. This looks pretty much like it is messed up. Regards Marcel