Re: choppy audio on ARM

Hi Brad

On Tue, Sep 15, 2009 at 2:00 PM, Brad Midgley [off-list ref] wrote:

Douglas,

run "lsusb" from a shell after the adapters are all connected.

Brad

On Tue, Sep 15, 2009 at 7:14 AM, Douglas Lopes Pereira
[off-list ref] wrote:

quoted

Hi Brad,

On Mon, Sep 14, 2009 at 5:47 PM, Brad Midgley [off-list ref] wrote:

quoted

Douglas

quoted

- Connecting bluetooth dongle over USB Hub:

usb 1-1: new high speed USB device using orion-ehci and address 19
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.3: new full speed USB device using orion-ehci and address 20
usb 1-1.3: configuration #1 chosen from 1 choice

- Connecting bluetooth directly on Sheeva Plug:

usb 1-1: new full speed USB device using orion-ehci and address 14
usb 1-1: configuration #1 chosen from 1 choice

"lsusb" in both cases should shed more light on the topology and where
full speed links creep in.

--
Brad Midgley

Could you elaborate a little bit more on that?

Thank you.

--
Brad Midgley

This is the output from lsusb. No interesting information in my point of view:

- Connecting bluetooth directly on Sheeva Plug:

Bus 001 Device 014: ID 0a12:0001 Cambridge Silicon Radio, Ltd
Bluetooth Dongle (HCI mode)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

- Connecting bluetooth dongle over USB Hub:

Bus 001 Device 008: ID 0a12:0001 Cambridge Silicon Radio, Ltd
Bluetooth Dongle (HCI mode)
Bus 001 Device 002: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub /
D-Link DUB-H4 USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Can you or someone else cite differences between EHCI driver handling
the usb dongle over the usb hub or directly connected?

Thank you for your patience and attention.

Douglas