Re: [Bluez-users] palm doesnt discover pc

update: I switched to an old dongle and I can now discover the pc:

works:
HCI Ver: 1.1 (0x1) HCI Rev: 0x33c LMP Ver: 1.1 (0x1) LMP Subver: 0x33c
        Manufacturer: Cambridge Silicon Radio (10)

doesnt work:
 HCI Ver: 2.0 (0x3) HCI Rev: 0x7a6 LMP Ver: 2.0 (0x3) LMP Subver: 0x7a6
        Manufacturer: Cambridge Silicon Radio (10)

this is odd as I bought this by the bluez developers advice.
its a bluetake BT007Ex

does anyone use such an adaptor with current bluez? is my device defected?

Niv
Niv wrote:

when I scan for bluetooth in my palm E2 I dont see the pc. I do see the
cellular and a pc running a previous version of bluez:
my kernel: 2.6.21-gentoo
bluez-libs-3.18 bluez-utils-3.18 bluez-hcidump-1.40
I run hcidump -X and I dont get anything when initiating the scan from
the palm.

however, I can find and ping the palm from the pc:

< HCI Command: Remote Name Request (0x01|0x0019) plen 10
    bdaddr 00:07:E0:56:6B:53 mode 2 clkoffset 0x0000

quoted

HCI Event: Command Status (0x0f) plen 4

    Remote Name Request (0x01|0x0019) status 0x00 ncmd 1

quoted

HCI Event: Read Remote Supported Features (0x0b) plen 11

    status 0x00 handle 42
    Features: 0xff 0xff 0x0d 0x00 0x00 0x00 0x00 0x00

quoted

HCI Event: Remote Name Req Complete (0x07) plen 255

    status 0x00 bdaddr 00:07:E0:56:6B:53 name 'E2'

quoted

ACL data: handle 42 flags 0x02 dlen 28

    L2CAP(s): Echo rsp: dlen 20
    41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54
< ACL data: handle 42 flags 0x02 dlen 52
    L2CAP(s): Echo req: dlen 44
    41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54
    55 56 57 58 59 5A 5B 5C 5D 5E 5F 60 61 62 63 64 65 66 67 68
    41 42 43 44

how can I turn my pc to be discoverable?

/etc/bluetooth/hcid.conf:
#
# HCI daemon configuration file.
#

# HCId options
options {
	# Automatically initialize new devices
	autoinit yes;

	# Security Manager mode
	#   none - Security manager disabled
	#   auto - Use local PIN for incoming connections
	#   user - Always ask user for a PIN
	#
	security auto;

	# Pairing mode
	#   none  - Pairing disabled
	#   multi - Allow pairing with already paired devices
	#   once  - Pair once and deny successive attempts
	pairing multi;

	# Default PIN code for incoming connections
	passkey /etc/bluetooth/pin-helper;
}

# Default settings for HCI devices
device {
	# Local device name
	#   %d - device id
	#   %h - host name
	##name "BlueZ on %h (%d)";
	name "BlueZ on %h (%d)";

	# Local device class
	## old ?
	class 0x3e0100;
	##new?? class 0x000100;

	# Default packet type
	#pkt_type DH1,DM1,HV1;

	# Inquiry and Page scan
	iscan enable; pscan enable;

	# Default link mode
	#   none   - no specific policy
	#   accept - always accept incoming connections
	#   master - become master on incoming connections,
	#            deny role switch on outgoing connections
	lm accept;

	# Default link policy
	#   none    - no specific policy
	#   rswitch - allow role switch
	#   hold    - allow hold mode
	#   sniff   - allow sniff mode
	#   park    - allow park mode
	lp rswitch,hold,sniff,park;
}

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users