[Bluez-users] hcidump output problem
From: Mahin Gupta <hidden>
Date: 2007-08-29 07:23:19
Hi All, I am using bluez-libs 3.14, bluez-utils 3.14, hcidump 1.40 .. when I am using hcidump -V -X I am continuously getting following output..
SCO data: handle 92 flags 0x00 dlen 48
0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
It gives nothing else ...
below is output of my hciconfig hci0 -a
[root@vmware-fc6 bluez-hcidump-1.40]# hciconfig hci0 -a
hci0: Type: USB
BD Address: 11:11:11:11:11:11 ACL MTU: 672:3 SCO MTU: 48:1
UP RUNNING PSCAN ISCAN
RX bytes:387498 acl:0 sco:7357 events:9 errors:0
TX bytes:34 acl:0 sco:0 commands:9 errors:0
Features: 0xff 0x3e 0x85 0x38 0x18 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy:
Link mode: SLAVE ACCEPT
Name: ''
Class: 0x000104
Service Classes: Unspecified
Device Class: Computer, Desktop workstation
HCI Ver: 2.0 (0x3) HCI Rev: 0x1f4 LMP Ver: 2.0 (0x3) LMP Subver:
0x1f4
Manufacturer: CONWISE Technology Corporation Ltd (66)
I have not created any SCO connection.. and there is no other device near
in the range..
[root@vmware-fc6 bluez-hcidump-1.40]# hcitool scan
Scanning ...
[root@vmware-fc6 bluez-hcidump-1.40]# hcitool con
Connections:
[root@vmware-fc6 bluez-hcidump-1.40]# hcidump -V
HCI sniffer - Bluetooth packet analyzer ver 1.40
device: hci0 snap_len: 1028 filter: 0xffffffffSCO data: handle 92 flags 0x00 dlen 48 SCO data: handle 92 flags 0x00 dlen 48 SCO data: handle 92 flags 0x00 dlen 48 SCO data: handle 92 flags 0x00 dlen 48 SCO data: handle 92 flags 0x00 dlen 48 SCO data: handle 92 flags 0x00 dlen 48 SCO data: handle 92 flags 0x00 dlen 48 SCO data: handle 92 flags 0x00 dlen 48
may be I am missing something here... can anyone guide me on this... thanks in advance for any help/suggestion/links .. Best Regards, Mahin Gupta.