Thread (6 messages) flat view 6 messages, 2 authors, 2005-10-13

Re: [Bluez-users] Help with Digianswer protocol analyzer

From: Jonathan Leong <hidden>
Date: 2005-10-13 13:56:43

Hi Marcel,

It should be the BPA-100. According to your website, I reckon it belongs to 
the first generation (08fd:0001) .
The device isnt marked Tektronix but Digianswer A/S Bluetooth Protocol 
Analyzer but shouldn't be much of a difference.
The loaded driver is hci_usb instead of bpa10x, maybe the driver was 
missing? modprobe bpa10x.ko gave me an error.

Regards,

Jonathan Leong

----- Original Message ----- 
From: "Marcel Holtmann" <marcel@holtmann.org>
To: <redacted>
Sent: Thursday, October 13, 2005 9:30 PM
Subject: Re: [Bluez-users] Help with Digianswer protocol analyzer

Hi Jonathan,
quoted
quoted
show me the content of /proc/bus/usb/devices and check if you have the
bpa10x kernel driver. If not then you might need to install a newer
kernel.
here we go,

T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs=  1
P:  Vendor=08fd ProdID=0001 Rev= 1.00
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=300mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  16 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  32 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  32 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  64 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  64 Ivl=1ms

Meanwhile, I'll go upgrade my kernel to 2.6.13 and get it patch.
I'll post the results in a bit.
this won't help, I think. Is this the BPA-100 or the BPA-105?

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users


-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help