[Bluez-users] Problems with Bridging and PAN Profile
flat view
From: Christoph Scholz <hidden>
Date: 2004-01-09 13:49:02
Hi all, I am experiencing problems with the Linux transparent bridge implementation combined with BlueZ. Probably it is not BlueZ' fault but related. Just wanted to know if someone else knows about this problem. I used a very simple PAN scenario with one master (GN) and two slaves (PANU). The GN runs a Linux bridge and the individual devices for the slaves are added to the bridge by using the "/etc/bluetooth/pan/dev-up" script. All similar to the PAN Howto. After establishing the two connections everything works fine. But after disconnecting the first slave (the one that was connected to the master first) communication between the master and the remaining slave does not work any more. Closer investigation shows that the failure is found in the bridge device that does not accept the received frames any more. Interestingly, when runing tcpdump on the bridged device everything seems to work fine again. This is probably due to the bridge device entering promiscuous mode. Probably, the problem is related to the following message found in /var/log/messages: "bnep1: attempt to add interface with same source address." This is due to the fact that all the bnep interfaces own the same MAC address (= BD_ADDR of the Bluetooth device). It seems the Linux bridge does not work reliably with duplicate mac addresses on its interface. Does anyone of you experienced similar problems? Any ideas on how to resolve this? Thanks. Regards, Christoph -- Christoph Scholz [off-list ref] University of Bonn, Institut of Computer Science IV Römerstraße 164, D-53117 Bonn, Germany Phone: +49 228 73 4117 Fax: +49 228 73 4571 http://web.informatik.uni-bonn.de/IV/Mitarbeiter/scholz/ ------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users