[Bluez-users] problems pairing with Nokia 3650

Hello all,

I have RedHat 8, I have upgraded the kernel to version
2.4.20-19.8 and it is running on a Dell Latitude Notebook with
BlueTake BT007 bluetooth adapter.

It seems that I have somewhat succesfully installed and
configured BlueZ stack on it, hcitool can see my Nokia3650, I can
ping it, rfcomm binds it but I cannot pair the two for my life.

1.  Pairing initiated from the phone.  My phone finds
"mynotebook"  when I select New paired device, it reports
"waiting for mynotebook" and then it says "unable to pair with
mynotebook" without ever asking for pin or anything.  The hcidump
is as follows

HCI Event: Connect Request(0x04) plen 10

< HCI Command: Accept Connection Request(0x01|0x0009) plen 7

HCI Event: Command Status(0x0f) plen 4
HCI Event: Connect Complete(0x03) plen 11
HCI Event: Page Scan Repetition Mode Change(0x20) plen 7

< HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4

HCI Event: Command Status(0x0f) plen 4
HCI Event: Connection Packet Type Changed(0x1d) plen 5
ACL data: handle 0x0029 flags 0x02 dlen 12

    L2CAP(s): Connect req: psm 1 scid 0x0045
< ACL data: handle 0x0029 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0045 result 2
status 0 > HCI Event: Number of Completed Packets(0x13) plen 5

HCI Event: Max Slots Change(0x1b) plen 3
HCI Event: Disconn Complete(0x05) plen 4

I cannot make any sense out of this but I see no errors.

2. Pairing initiated from "mynotebook".  I use rfcomm connect
btaddress and the phone asks for a pin, I type in the pin
(correct one) and I get either

* connection refused

or

* Can't connect RFCOMM socket: Resource temporarily unavailable

on the terminal.  Obviously if this does not work I cannot use
gprs and pppd either.  Interesting thing is that before I try
connecting using pppd rfcomm says the channel is clean and after
the thing bombs it reports channel closed.  I really have no idea
where the problem is, I tinkered with hci.conf and such but
nothing seems to help, even disabling authentication has no
effect.  First I thought it was going to be a minor config issue
since the phone is visible but I'm not sure anymore.  Any help
and advice is appreciated.

Thanks Jirka

--=20
Vyhraj Ford Fiesta s klimatizac=ED a dal=B9=ED ceny!
V=EDce na http://soutez.volny.cz=20



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users